Chinese Wheel Loader ML955
Chinese Wheel Loader ML955
●The loader is equipped with the low-speed and high-torque Euro. II Weichai engine featuring low fuel consumption, strong power and high reliability, for which a horizontally-mounted two-stage air filter of high reliability is installed, Cummins engine is optional.
● The cooling system is applied with the electrically-controlled thermal energy management module and has its radiator structure and intake/exhaust duct optimized, effectively reducing the engine water temperature and the oil temperature of the hydraulic system, and enhancing the cooling efficiency of the complete loader.
● The loader is applied with the technologically-sophisticated shaft transmission, enabling easy operation, good reliability and high efficiency; the drive axle is reinforced to provide large loading capacity and high reliability.
● The new steel cab applied offers for drivers a wide vision and a greater operating space, in which the full-coverage interioris configured to give a good sealing performance, and the optional A/C offers a good comfort.
● The hydraulic pipelines are of dual-sealing structure, further enhancing the tightness of hydraulic system.
● The loader is applied with the reinforced rear/front frames which have gone through 200,000 cycles of fatigue intensifying tests, and the load of complete loader is reasonably distributed, both of which contribute to a high loading capacity and a good stability.
● The optimal design is conducted for the implement, which ensures large breakout force and high full-load coefficient; the main cutting board of the bucket is of the trapezoidal wear-resisting steel structure, and the bottom wear-resisting plate is of thickened structure, which ensures small shoveling resistance and good wear-resisting property.
Product parameters
Model | ME18.9 |
Operating Weight(Ton) | |
Gross weight (kg) | 1700<1640> |
Weight of main machine (kg) | 1360<1300> |
Engines | |
Types | In-line water-cooled three-cylinder direct injection diesel engine |
Model | 3TNV70-XBV |
Output power/speed (kW/min-1【PS/rpm】 | 10.1/2200【133.7/2200】 |
Bucket | |
Capacity (m³) | 0.05 |
Width (mm) | 450 |
Scope of work | |
Maximum digging depth (mm) | 2200 |
Maximum vertical digging depth (mm) | 1850 |
Maximum digging height (mm) | 3690 |
Maximum loading and unloading height (mm) | 2630 |
Maximum digging radius (mm) | 3710 |
Minimum radius of swing at front end (at lateral swing) (mm) | 1520 [1290 when swinging sideways] |
Lateral swing of boom (left/right) (degrees) | 42·75 |
Performance | |
Maximum digging force (kN1 [kgf]) | 15.2【1550】 |
Travel speed (km/h) | High 3.8 Low 1.9 <High 4.3 Low 2.1> |
Swing speed (min-1【rpm】) | 9.5 |
Iron track ground pressure (kPa [kg/cm²]) | 29.0【0.30】 |
Rubber track ground pressure (kPa [kg/cm²]) | 28.0【0.29】 |
Hydraulic system | |
Pump flow rate (L/min) | 17.6 × 2 (variable) · 13.2 × 1 (gear) |
Main overflow pressure (Mpa [kg/cm²]) | 20.6【210】×2 16.7{170】×1 |
Undercarriage | |
Track form | Iron Track<Rubber Track> |
Track width (mm) | 230 |
Ground clearance(mm) | 175 |
Blade | |
Width x height (mm) | 950/1280×235 |
Lift (mm) | 260·205 |
Oil tank | |
Capacity (L) | 20 |
Shipping dimension | |
L×W×H (mm) | 3460×1280(950)×2370 |
technical soecifications | |
Performance parameters | |
operating range | |
machine dimensions |
Reviews
There are no reviews yet.